xDuoo TA-03 XMOS WM8740 24Bit/192KHz USB DAC 12AU7 Tube Headphone Amplifier
Price:
As of 2021-01-19 10:57:11 GMT (more info)
Product prices and availability are accurate as of 2021-01-19 10:57:11 GMT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Product Information (more info)
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Manufacturer Details
Technical Criterion:
Power Supply: ~ 220V/ ~ 110V
Output Power: 500mW(600/300ohm load)
300mW(150ohmload)
Certified OS: Win XP, Vista, Win7, Win8 (must install driver)
MAC OS X (do not need to install motorists)
Supported sampling: USB input: Optimum 192kHz/24bit
Frequency Range: Audio In: 10Hz ~ 100KHz(+/- 0.5 dB)
USB In: 20Hz ~ 20KHz(+/- 0.5 dB)
Gain: +13 dB
THD+N: 0.09 % (1KHz)
S/N: 110dB
Appropriate Earphone Impedance: 60ohm - 600ohm
Size: 215 * 130 * 100mm
Weight: 2.50 Kg
Packing lists:
xDuoo TA-03 Earphone Amplifier
A/C 100-240V Power Adapter
Power Supply: ~ 220V/ ~ 110V
Output Power: 500mW(600/300ohm load)
300mW(150ohmload)
Certified OS: Win XP, Vista, Win7, Win8 (must install driver)
MAC OS X (do not need to install motorists)
Supported sampling: USB input: Optimum 192kHz/24bit
Frequency Range: Audio In: 10Hz ~ 100KHz(+/- 0.5 dB)
USB In: 20Hz ~ 20KHz(+/- 0.5 dB)
Gain: +13 dB
THD+N: 0.09 % (1KHz)
S/N: 110dB
Appropriate Earphone Impedance: 60ohm - 600ohm
Size: 215 * 130 * 100mm
Weight: 2.50 Kg
Packing lists:
xDuoo TA-03 Earphone Amplifier
A/C 100-240V Power Adapter
Product Features
Adopts XMOS chip for USB signal input, PC jitter-free USB Audio with Asynchronous Transfer Mode, provides I2S interface for decoding, can support up to 192KHz/24Bit USB signal, support WASAPI, ASIO, KS Kernel Stream Mode.
Adopts high-performance D/A chip: WM8740*2, can supports up to 192KHz/24Bit I2S signal;It adopts 12AU7 tube for pre- amp, 6C19 tubes each channel for post- amp, making sounds soft and attractive.
Adopting capacitive coupling output to dispense the limit of output transformer and make the frequency response of the amplifier more close to the amplifier limit of the tubes; Adopting ELNA, NICHICON, RUBYCON and other famous capacitors.
Adopting the high-quality E type transformer with low noise and low leakage flux specially for transistor amplifiers; Using cherry wood for its lateral plate makes it look very upscale.
With 1 way Single-Ended RCA input, it can be used as independent headphone amplifier.
